3.0 - Clean up

Each week there are a 15 clean up assignments that must be done. The purpose of clean up is to 1. Clean up, 2. Replace equipment, and 3. Inventory equipment. There is a clean up bell that sounds, (5 minutes before the end of the hour). This is a warning bell that indicates it is time to stop work, put your work away, do your assigned clean up and report to the instructor any missing or non-functioning equipment, then go to your chair.

The following are descriptions of clean up assignments, by the end of the quarter all of these areas will mean more.

Failure to do clean up assignments will result in: extra duty assignments, referrals, minus grade points, and restriction from lab work.

 

CLEAN UP ASSIGNMENTS- Clean up assignments last for two weeks. If there are any questions, or missing items please notify instructor.

  1. Enlargers 1-6 - RETURN NEGATIVE CARRIERS TO PAPER ROOM SHELF, place easel in drawer, clean off enlarger base, leave the enlarger head in the lowest position. Dry towel any wet areas, including the fronts of the cabinets once a week.
  2. Enlargers 7-12 - RETURN NEGATIVE CARRIERS TO PAPER ROOM SHELF, place easel in drawer, clean off enlarger base, leave the enlarger head in the lowest position. Dry any wet areas, including the fronts of the cabinets once a week.
  3. Film Rooms - Remove all the developing hangers. Replace cover and shut off water, clock and dry towel sink area, shelves and clock.
  4. Paper Cutter, Darkroom Sink, Darkroom Floor - Place blade in lock position and wet and dry towel area. Wet and dry towel inside of sink and outside of trays. Dry any wet areas, place all the paper towels from floor in basket. Check towel dispenser and report if it is empty.
  5. Cabinets 1 & 2 - Replace all items - funnels, graduates, Replace changing bags
  6. Cabinet 3 & 4 - Place developing hangers in proper racks. Replace all developing tanks, lids, caps and reels.
  7. Clean Green Counter, Sinks, Table and Stools - All wet spots should be wet toweled and dry when finished. Shut off water and return developing hangers and tanks to proper cabinet. Clean off table place and place stools under table.

    8.  

     

  8. Dryer, mounting and film drying area -clean up, turn off heat, and place prints in box.
  9. Light Tables - Clean off tables and shut off lights.
  10. Assignments & Lab Cabinets - Replace all assignments and labs that are left out.
  11. AV Area - Shut off equipment. All tapes must be returned.
  12. Portrait area - Shut off lights, clean up, and return camera if necessary.
  13. Rubber Cement – Return all rubber cement bottles to the cabinet.
  14. Classroom tables and chairs - Clean off tables, return chairs, and place all cans in recycle container.
  15. Display Case - clean off glass on display case.
  16. Computers - Clean up around computers. Push in chairs, throw away all papers and messes.

 

Santa Rita Photo Home Page